Fine Adjustment Of Scan Start Position (Function Mode 54) - Ricoh G157 Service Manual

Fine Adjustment of Scan Start Position (Function mode 54)

This function is to adjust the scan start position.
1. Enter the "Maintenance" mode.
2. Press the "5" and "4" keys in this order.
3. "SCAN START ADJ." appears on the LCD.
4. "1. ADF 2. FB" appears.
5. Select the device that needs an adjustment to the start position.
1) "1": To adjust the start position of the ADF.
2) "2": To adjust the start position for flat-bed scanning (FB: Flat Bed).
6. Press the "1" or "2" key to display the present adjustment value for the start
position. The value can be adjusted in 11 steps from +5 to –5 (mm).
7. Press the " " key to increase the value, and the " " key to decrease it.
8. Press the "Stop/Exit" key to return the machine to the initial display of the
maintenance mode without adjusting the value.
9. Press the "Menu/Set" key.
10. "ACCEPTED" appears on the LCD. One second later, the machine indicates
"1. ADF 2. FB" on the LCD.
SM 5-33
MAINTENANCE MODE
G157