Appendix; Definitions Of Terminology; Table 34: Specific Terms Used In This St - Ricoh Gestetner MP 4001 Manual

Table of Contents

Advertisement

8 Appendix

8.1

Definitions of Terminology

For ease of reader understanding, Table 34 provides definitions of the terms used in this ST.
Terms
D-BOX
FTP server
HDD
Ic Hdd
Ic Key
IP-Fax
MFP
Responsible manager of
MFP
MFP Control Software
MFP Control Data
LAN-Fax Transmission
S/MIME
user
information
SMB server
Copyright (c) 2010 RICOH COMPANY, LTD. All Rights Reserved.

Table 34: Specific terms used in this ST

A storage area for document data on the HDD.
A server for sending files to a client computer and receiving files from a client
computer using File Transfer Protocol.
An abbreviation of "Hard Disk Drive". Refers to the HDD installed in the
TOE.
A hardware device that encrypts data to be written on the HDD and decrypts
data to be read from the HDD.
A chip that contains a microprocessor for encryption processing and
EEPROM where a private key for secure communication is held.
The Ic Key holds the keys for validity authentication and encryption
processing, and a random number generator.
A function that sends and receives document files between two faxes that are
directly connected to a TCP/IP network. It can also send document files to a
fax that is connected to a telephone line.
An abbreviation for digital "multi function product". In this ST, "MFP" also
refers to the TOE
A person in an organisation in which MFPs are used and who has authority to
assign MFP administrators and supervisor. (Or the person who is responsible
for the organisation).
(Examples: MFP purchaser, MFP owner, manager of a department where
MFPs are used, or a person in charge of an IT department.)
Software installed in the TOE that can identify TOE components such as
system/copy, network support, scanner, printer, fax, Web support, Web Uapl,
and Network Doc Box.
Manages the resources for units and devices that comprise the MFP and
controls their operation.
A generic term for a set of parameters that controls the operation of an MFP.
A function that faxes document data from a client computer via the TOE when
the client computer is connected to the TOE via a network or USB Ports.
Information about each general user that is required for using S/MIME.
Includes e-mail address, user certificates, and a specified value for S/MIME
use.
A server for sharing files with a client computer using Server Message Block
Protocol.
Definitions
Page 77 of 81

Advertisement

Table of Contents
loading

Table of Contents