Code 49 NEXT LIFE SET
This mode sets the replacement timing (number of prints) for the PM parts.
1. Select "NEXT LIFE SET" in the "FACTORY MODE"
using the "Scroll" key.
2. Press the "Select" key.
3. Press the "Select" key after selecting a code.
1~6, B, C, F, G: Not used
7: Belt Cartridge (BL)
8: Fusing Unit (FU)
9: Drum Cleaner/ Transfer Roller (TR)
A: Transfer Belt (120K)
D: Paper Feed Roller (PICK ROL)
E: Paper Feed Roller (PICK LFU)
4. Use the "Scroll" key to move the cursor, and use the
"Select" key to input a value at the blinking digit.
5. Use the "Scroll" key to move the cursor to "SET",
and then press the "Select" key to store the set
value.
6. The display returns to "NEXT LIFE SET".
7. Press the "Clear" key to return to "FACTORY
MODE".
SM
39 FACTORY MODE
49 NEXT LIFE SET
123456 89ABCDEFG
NEXT
NEXT
49 NEXT LIFE SET
39 FACTORY MODE
5-19
SERVICE MODE MENU
NEXT LIFE SET/T
BL
UNIT ?
XXXXXXp.
SET
BL
UNIT ?
XXXXXXp.
SET
23456789ABCDEFG
MARGIN ADJUST/L
G157