Wsw18 (Function Setting 3) - Ricoh G157 Service Manual

MAINTENANCE MODE

WSW18 (Function setting 3)

Selector
No.
1 Not used.
Detection enabled time for CNG
2, 3
and no tone
4, 5 Not used.
6 Registration of station ID
7, 8 Tone sound monitoring
Selectors 2 and 3: Detection enabled time for CNG and no tone
After the line is connected via the external telephone or by picking up the handset
of the machine, the machine can detect a CNG signal or no tone for the time length
specified by these selectors. The setting specified by these selectors becomes
effective only when selector 8 on WSW20 is set to "1".
Selector 6: Registration of station ID
Setting this selector to "0" permits the registration of station ID for Austrian and
Czech models.
Selectors 7 and 8: Tone sound monitoring
These selectors set monitoring specifications of the tone sound inputted from the
line.
G157
Function
5-60
Setting and Specifications
No. 2. 3.
0 0: 40 sec.
0 1: 0 sec. (No detection)
1 0: 5 sec.
1 1: 80 sec.
0: Permitted
No. 7. 8.
0 x: No monitoring
1 0: Up to phase B at the
calling station only
1 1: All transmission
phases both at the
calling and called
stations
1: Prohibitted
SM