Machine Error Code Indication (Function Mode 82) - Ricoh G157 Service Manual

MAINTENANCE MODE
Equipment Log
WTNR_CH:
WTNR_PG:
TTL_JAM:
POSA1_JAM:
POSA2_JAM:
POSB_JAM:
POSC_JAM:
ADF_JAM:
ADF_PG:
FB_PG:
MACHINEERR_ 01
to 10:
COMERR1 to 3:

Machine Error Code Indication (Function mode 82)

This function displays the last error on the LCD.
1. Enter the "Maintenance" mode.
2. Press the "8" and "2" keys in this order.
3. The LCD shows "MACHINE ERRORXX."
4. Press the "Stop/Exit" key to return to the initial display of the maintenance
mode.
G157
Number of times the waste toner cartridge has been replaced
Number of pages printed since the most recent time that the waste
toner cartridge was replaced
Total number of jams
Number of jams at position A1
Number of jams at position A2
Number of jams at position B
Number of jams at position C
Number of document jams that occurred at the ADF
Number of scanned pages from the ADF
Number of scanned pages from the flat-bed scanner
Last machine error code 01 to 10
Last communication error code 1 to 3
5-38
Description
SM