Code 47 Total Page Set; Code 48 Each Image Set - Ricoh G157 Service Manual

SERVICE MODE MENU

Code 47 TOTAL PAGE SET

This mode is used to input the total number of pages in the NVRAM. Do this after
executing "NVRAM INITIAL" or replacing the BCU.
1. Select "TOTAL PAGE SET" in the "FACTORY
MODE" using the "Scroll" key.
2. Press the "Select" key.
3. Use the "Scroll" key to move the cursor, and use the
"Select" key to input values at the blinking digit.
4. Use the "Scroll" key to move the cursor to "SET",
and then press the "Select" key to store the set
value.
5. The display returns to "FACTORY MODE" after
completing the "TOTAL PAGE SET" mode.

Code 48 EACH IMAGE SET

This mode is used to input the total number of pages of each color in the NVRAM.
Do this after executing "NVRAM INITIAL" or replacing the BCU.
1. Select " EACH IMAGE SET" in the "FACTORY
MODE" using the "Scroll" key.
2. Press the "Select" key.
3. Select the desired color.
4. Use the "Scroll" key to move the cursor, and use the
"Select" key to input values to the blinking digit.
5. Use the "Scroll" key to move the cursor to "SET",
and then press the "Select" key to store the set
value.
6. The display returns to "EACH IMAGE SET".
7. Press the "Clear" key to return to "FACTORY
MODE".
G157 5-18
39 FACTORY MODE
TOTAL PAGE SET/
47 TOTAL PAGE
XXXXXXp. SET
47 TOTAL PAGE
XXXXXXp.
39 FACTORY MODE
MARGIN ADJUST/L
39 FACTORY MODE
EACH IMAGE SET/
48 IMAGE OF
Y /M /C /K
48 IMAGE OF Y
XXXXXXp.
48 IMAGE OF Y
XXXXXXp.
39 FACTORY MODE
MARGIN ADJUST/L
SET
SET
SET
SM