2.9
Set Each Drawer ID
Each newly installed 2P drawer needs to have a unique ID set on its OCP. Set
the ID numbers for each drawer on their OCP. Check your PCI drawer's IDs,
so that you do not create duplicates.
Figure 2–11 Setting Drawer ID
Each component must have its ID set according to its position in the cabinet.
If, for example, you have no PCI in the position associated with ID-6, you do not assign that
ID to the drawer above it. The drawer above retains ID-7 to indicate its physical position in
the cabinet, and the drawer below is ID-5
(See Table 2–2).
2-16
HP AlphaServer ES80 Upgrade