Thermal Printer Specification - Sam4s NR-500 Series Service Manual

2-3 Thermal Printer Specification

2-3 A. Printer Specification (58mm*1station or 2station)
Item
Model
Print Method
Total Dots Per Line
Printing Format
Dot Pitch
Printing Speed
Printing Direction
Feeding Method
Paper Feeding Minimum Feed Pitch
Maximum Feeding Speed
Power Voltage
Power Supply Volt
Circuit Input Voltage
Heat Element Density
Printer Head Total Head Elements
Available Printing Width
Line Feed Motor
Head Temperature
Sensor Out-of-paper Detection
Platen Position Detection
Reliability Life
Dimension (mm)
Weight
SAM4S NR-500 SERIES
All manuals and user guides at all-guides.com
LTP01-245-11
Thermal Dot Line Printing
384 Dots
Vertical
Horizontal
70mm/sec, 15 Lines/sec
Unidirectional Friction Feed
Friction Feed
0.0625 mm
75 mm/sec (At 8.5V of Motor Voltage)
4.2~9.5V (Recommend)
3.3V
8 Dots/mm (0.125mm/Dot)
384 Dots/Dot Line
48 mm (384 Dots)
1-2 Phase Bi-Polar Stepping Motor
Thermistor
Reflection type photo interrupter
Mechanical Switch
50km or more
70.3 (W) ×32.7 (D) ×15.3 (H)
Approx. 44 g
Table2-2 Thermal Printer Specification
2 Product Specifications
Description
: 0.125 mm
: 0.125 mm
TPH / Motor
Head Control / Sensor
(1step 0.0625mm)
(Option)
Remark
2-3