Table of Contents
Advertisement
Endorsement Message
The Endorsement Message is a programming message of up to ten lines of 32 characters that
prints when a check is endorsed on an optional slip printer.
206 Program Mode Programming
1. From the LOGO DESC. PROGRAM screen, press 2 to display the
ENDORSEMENT MESG. Screen:
ENDORSEMENT MESG.
LINE 1 :
LINE 2 :
LINE 3 :
2. Using the alpha numeric keyboard overlay, type the first line of the message.
Each line can be up to 32 characters, although only the last 19 characters you
have entered will display. If you make a mistake, press the BACKSPACE key
to erase the previous character. After you have completed typing the first line,
press ENTER to accept the new message and advance to the second line, or press
ESC to return to the LOGO DESC. PROGRAM screen without making any
changes.
3. Using the same procedure, continue programming each line as necessary. Press
ESC at any time to exit. After programming the third line, the next three lines
display:
ENDORSEMENT MESG.
LINE 4 :
LINE 5 :
LINE 6 :
4. Continue programming all ten lines if necessary. When the last line has been
entered, press ENTER to accept the message and return to the LOGO DESC.
PROGRAM screen.
SAM4s ER-655II v1.2
Advertisement
Table of Contents
