Channel 3 Position - Ko Propo Esprit-3 Universe Instruction Manual

3CH POS (Third channel position)

Adjusting the neutral position of channel 3. (STEP 1 & 3 only)
This affects only the case of using 3CH TR AVEL for STEP 1 or 3. See page 65.
From the initial screen, use the Jog Dial, (+) or (-) keys to open the Function menu.
Use the Jog Dial, (+) or (-) keys to choose the "3CH POS" from the menu list and press the 'ENTER'
key.
Use the Jog Dial, (+) or (-) keys to adjust the set position.
Please be careful not to confuse "SET UP" with "CH3-POS" appearing in
the function menu.
ET and BT cannot be set in 3CH POS. This is only the neutral position
setting for STEP 1 or 3. CH3.
POS function controls the operation of channel 3.