Reverse Switch - Ko Propo Esprit-3 Universe Instruction Manual

REVERSE (Reverse Switch)

Set the operational direction of each channel.
You can change the operational direction of each channel.
The servo and ESC operational direction is reversed.
[How to open the setup screen]
Push Enter or Back key to
return the cursor.
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "REVERSE" and press the
'ENTER' key.
Use the Jog Dial, (+) or (-) keys to select the channel that you would like to modify press the
'ENTER' key and you can set the respective channel. (REVERSE / NORMAL)
For "3CH", you can only select this when you have selected "3CH" in the "CH.SELECT" function.
(Please refer to P55.)
Pressing the 'BACK' key will return you to the menu list.
Can change selected Channel
In the case of an electric car, it is not necessary to set this function when using an ESC.
However with older ESC, unless this is set to reverse it may not operate correctly.
The operational direction of the steering may differ with different cars.
Please verify this with each car.