Ko Propo Esprit-3 Universe Instruction Manual page 36

TH SPEED (Throttle Speed) - 2

Throttle Speed
When controlling the throttle quickly, the car might be out of control.
Using the throttle speed can limit the operational speed of the throttle.
The throttle speed function allows you to set the "SPEED", "POSITION" and "MODE".
The "MODE" setting will allow for different setting for the "SPEED" and "POSITION".
This function will effect the forward stick action. It does not affect the brake control.
MODE (Mode)
1 WAY, 2 WAY and 3 WAY are the three selection types.
1 WAY: The entire range in the throttle speed control is affected.
2 WAY: The range in the throttle speed control is divided into two ranges.
3 WAY: The range in the throttle speed control is divided into three ranges.
POSITION (Position)
The point, which divides the range where the speed is set, is assigned.
Position 1 will always be the same or smaller then position 2.
The numerical value starts at 100, which is the usual reaction speed, and any lower value will reduce the reaction
speed of the servo.
SPEED (Speed)
The ET lever can be used to set the speed settings of the three ranges. (P58 SET UP)
When the "TH:SPEED" is set to 100%, the ET lever can be used.
You can assign the function to be turned on/off with the use of the ET lever or BT button.
The same effect is applied to an engine car and an electric car using an ESC.
Neutral
SPEED.L
SPEED.H
Max
For 2WAY
Neutral
SPEED.L
SPEED.H
Max
For 2WAY
The same effect is applied to an engine car and an electric car using an ESC.
Neutral
SPEED.L
SPEED.M
SPEED.H
Max
For 3WAY
Neutral
SPEED.L
SPEED.M
SPEED.H
Max
For 3WAY