Down Timer - Ko Propo Esprit-3 Universe Instruction Manual

DOWN TIMER (Down Timer)
0
Setting the down timer (counts down).
The down timer is a timer that subtracts time from the total time that you have set.
Use this when you need to time your refueling of your gas car.
[How to open the setup screen]
Set up
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "DOWN TIMER" and press the
'ENTER' key.
If the down timer is not assigned to an ET or BT the setup will be shown waiting for an assignment.
If the down timer is stopped, settings can be changed in the settings screen.
The down timer counts time down from the initial setting automatically.
(You can also set the total time manually.)
With the automatic set you can set the time that you need to refuel.
If the pre-alarm is set, this can give you notice that the refueling time is fast approaching.
You cannot use this function unless it is assigned to an ET lever or BT button.
You can assign a custom tone for the alarm sound of the down timer. (P27)
The initial setting is not assigned and the setup screen will be displayed.
START
Control BT2 to start
It is not necessary to
display the timer screen.
Count indication
START Function to set the time.
Ready to start
Start at BT2
While couting
"READY" will blink
When push reset button
in Down timer screen.
Perform a pause or
Auto start function will
start whenever the
wait for start. 'ENTER' key is
pressed.
Timer
Initial value 5 min
Min.value 1 min
Max.value 99 min 59 sec
Pre-alarm
Initial value 0 min
Min.value 0 min
Max.value 59 sec
Reset start
It is not necessary to
display the timer screen
It is necessary to Display
Botton
Time for the timer is set by operating
the BT2 (button or key that is
allocated to the function) in time
measurement of 1m00s (one minute)
or more.
Pressing the reset keys while in the "AUTO
SET" screen and will stop if less than 1
minute. (This will stop when powered – off.)
Stop in time
Reset key (Push+ ,
-key at the same time )
the timer screen.