Ko Propo Esprit-3 Universe Instruction Manual page 25

This is the menu displayed when the 'ENTER' key is pressed from the initial screen.
Menu Deletion
Deleting a function from the menu list.
Functions in CUSTOM1 and CUSTOM2 can be deleted. (Functions in the MASTER menu cannot be
deleted.)
Select the Menu
Select the name of the menu that you wish to delete a function from.
Using the Jog Dial, (+) or (-) keys, move the cursor to the menu and press the
'ENTER' key.
Select the Function Name.
Move the cursor with the use of the Jog Dial,
(+) or (-) keys.
Select the function name to delete and press the
'ENTER' key.
Once this is performed you can continue to delete
functions from this screen.
You can repeat and continually delete functions from the same screen.
Press the 'BACK' key to exit this feature. (Or you can return to the initial screen by pressing and holding
at the same time the 'ENTER' and 'BACK' keys.)
Moving a Menu Function
The order that the functions are displayed in
the menu can be changed. CUSTOM1 and
CUSTOM2 menus can be edited.
(MASTER menu cannot be edited.)
Menu Name Selection
Select the menu to be edited.
Move the cursor using the Jog Dial,
(+) or (-) keys and select either
CUSTOM1 or CUSTOM2 and press the
'ENTER' key.
Select the Function Name
Move the cursor using the Jog Dial, (+) or (-) keys and select the function
name and press the 'ENTER' key.
Selecting the Position
Decide where you would like to have the function placed within the menu
using the Jog Dial, (+) or (-) keys and press the 'ENTER' key. The screen
will return to the function names to be selected for movement.
You can repeat and continually move functions from the same screen.
Press the 'BACK' key to exit this feature.
(Or you can return to the initial screen by pressing and holding at the
same time the 'ENTER' and 'BACK' keys.)
Main Menu (2)
CUSTOM1 is selected.
ET:POSITION is selected.
CUSTOM1 is selected.
MODEL SELCT is selected.
MODEL SELCT is inserted
In this picture,
In this picture,
In this picture,
In this picture,
In this picture,
after SUB:TRIM.
After the function is
positioned,
it will look like
the figure above.
2