Up Timer - Ko Propo Esprit-3 Universe Instruction Manual

Setting the up timer function.
The up timer is a timer that simply adds time, but this also allows for the use of the lap navigation.
[How to open the setup screen]
They don't have an allotment
with an initial situation,
a setup screen is displayed.
"READY" will brink
When time data is
display push reset key
to clear the display
There are two kinds of start methods.
It starts with the
assigned button.
Can set While timer is stop
(Can not set up while pausing.)
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "UP TIMER" and press the 'ENTER'
key.
If the up timer is not assigned to an ET or BT the setup will be shown waiting for an assignment.
If the up timer is stopped, settings can be changed in the settings screen.
The cursor returns to the beginning of the function if the 'ENTER' or 'BACK' key is pressed and pressing
the 'BACK' key again will return you to the function menu list.
The lap navigation will alarm a sound for your target time lap once it has been set.
This is convenient when you are running.
You can start the up timer and the "NAVI" function with the same button.
After you have started the up timer and you press the button again, this will start your target lap time.
Every time you press the button it will reset only your target lap time alarm.
To stop or pause the timer while in the up timer screen, press the 'ENTER' key.
To reset the timer, press and hold simultaneously the (+) and (-) keys.
UP TIMER (Up Timer)
Start
Throttle Start
TH
It starts for the
throttle operation.
Key Start
In an example, if BT1 is
pushed , it will start.
It can start , even if it
is not a timer screen.
ALARM
Alarm is sounded after the counting setting time has expired.
(Alarm tone can set)
Initial Value OFF , Min.Value 1 min, Max.value 99 min
Set each item P.ALARM
Can set Pre Alarm befor the Alarm.
Initial Value OFF , Min.Value 1 sec , Max.value 99 sec
NAVI
Set LAP Navigation
Initial Value OFF , Min.Value 3.00 sec , Max.value 99.99 sec
If you assign it to BT1.
Start Counting
Stop
Control BT1 can be used
even if you are not in
the timer screen.
Pause
Pressing the 'ENTER' key is
only possible while in the
timer screen.

Restart
Control BT1 or while
paused and the
screen is displaying
the Timer, press the
'ENTER' key.
Reset
While timer is stopped
(including pause), press
the Reset keys.