Changing The Menu - Ko Propo Esprit-3 Universe Instruction Manual

Table of Contents

Advertisement

Changing the Menu

1 1
In this unit, there are a lot of functions available and not all will be used all the time.
Hence, the newly developed 'Change Menu System' has been installed.
This system was made so that you are able to quickly call up more commonly used functions by switching
the Menu listed in the resister.
Change Menu
By registering the function contents into CUSTOM1 or CUSTOM2, the function menu displayed becomes a very
easily manageable system to navigate.
Functions can be added/deleted and placed in the order that you would like for quick and easy access.
For instance, CUSTOM1 can have a lot of the functions that you would use for practice and CUSTOM2 would have
only the functions that you would use for a race.
Switching the menu setting can easily be made with three actions.
If the MASTER menu is used, all functions are displayed.
Unregistered item functions are still effective. (Just not displayed.)
Change Menu Procedure
The figure is a setting example when using the
MASTER menu.
You must register items in the menu for CUSTOM1
beforehand.
(Please refer to P24 'CUSTOM1 initial condition'
for the content of the menu.)
Pressing the 'ENTER' key from the initial
screen to display the main menu.
MASTER, CUSTOM1 and CUSTOM2
are the three menu items that are
displayed on the first screen of the main
menu. Select the item that you want by using the
Jog Dial, (+) or (-) keys and then press 'ENTER'.
The display screen returns to the initial
screen. The name of the menu option
selected is changed and displayed.
The 'BACK' key is pressed.
Please refer to the main menu P24 for detailed operation methods concerning additional editing for
each menu.
be used if you register or add items into the menu. (Menu
The 'ENTER' is pressed.
Jog dial operation
I cannot get to the initial screen!
Whatever the display screen is on, it will return to the initial screen if you keep pressing the 'BACK' key.
Cannot select CUSTOM2!
CUSTOM2 cannot be selected from the factory default settings because there are no items registered. It can
MASTER is
used
Changed to
CUSTOM1
The example displayed shows
the switch from MASTER to CUSTOM1.
(+) and (-) keys are pressed.
Pressing and holding simultaneously the (+) and (-) keys. (Reset)
Addition P24)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents