Ko Propo Esprit-3 Universe Instruction Manual page 27

CONTRAST (LDC Contrast)
Adjusting the contrast of the LCD display.
Using the Jog Dial, (+) or (-) keys to adjust the contrast of the LCD. You can adjust the contrast to eight different levels.
BUZZER TONE
The sounds assigned to various functions can be selected from 7 different stored
sounds. Create your own personal melodies with the 6 available custom tones.
(Please refer to P28.) There are no tones stored in CS1~CS6 with the factory
default setting.
Main Menu (4)
Adjusting the contrast to a very light setting (for warm room
temperatures and low outdoor temperatures) may cause the
character display to be faint. Please adjust accordingly.
BUZZER
The tone pitch of the buzzer is adjusted. The tone pitch of the
alarm and other functions are changed.
Listing the buzzer tone(s) that are assigned to various
functions and features in the transmitter.
You can create or edit your own tone to be used.
Use the Jog Dial, (+) or (-) keys to adjust the interval pitch of the
buzzer sound.
Pressing the 'ENTER' key on a listed item will change the cursor.
Once the cursor changes use the Jog Dial, (+) or (-) keys to change
the setting assignment.
Up Timer
Lap Timer
Down Timer
Power Alarm
Battery Alarm
Start up
SYS : System default tone
CS1 : Custom Tone 1
CS2 : Custom Tone 2
CS3 : Custom Tone 3
CS4 : Custom Tone 4
CS5 : Custom Tone 5
CS6 : Custom Tone 6
Up Timer Up Timer Up
Lap Timer Lap Timer Up
Down Timer Lap Timer Down
Power Alarm Power Alarm (Alarm)
Battery Alarm Battery Alarm (Alarm)
Startup Startup (When starting)
This continues to the
following page.
2