Automatic Start - Ko Propo Esprit-3 Universe Instruction Manual

AUTO START (Automatic Start)
0
The throttle quantity of movement set is automatically from a starting position.
When this function is set correctly, pulling the throttle at the start will set the throttle to a fixed position.
Releasing the throttle once will disengage this function and normal throttle operation will return.
[How to open the setup screen]
Set Throttle position.
The position in which the function of
throttle stick (CH2) works, is set.
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "AUTO:START" and press
the 'ENTER' key.
The automatic start will be on stand-by if the reset feature is used to activate the function.
("READY" will be flashing on the screen.)
Use the Jog Dial, (+) and (-) keys to access the setting screen.
(You cannot adjust the settings when "READY" is flashing.)
When pressing the 'ENTER' key, the cursor indication changes and the setting can be altered.
To reset the setting to the factory default, press and hold simultaneously the (+) and (-) keys.
To return to the menu list press either the 'BACK' or the 'ENTER' key.
PRESET : Position of the throttle is appointed when the automatic start is activated.
Initial Value: F0
TH:POS : Appoints the position of the throttle stick where the automatic start engages.
Initial Value: 5%
When the "READY" is flashing the automatic start is active, returning to the main menu or the initial
screen will still allow it to be active as long as it is being held.
Return by pressing the 'BACK' key, but "READY" is still on.
Maximum Value: F150
Normally full throttle is appointed, but please test the setting first.
Maximum Value: 100%
When the setting is "OFF", the automatic start does not work.
Please test the operation in advance before it is to be used.
Reset then start
blinking "READY"
Minimum Value: F0
Minimum Value: 5% or OFF
When the stick is pressed
forward for the throttle,
the indication changes to
ON when the point of the
"TH:POS" is reached.
When the stick is returned,
the indication returns to OFF.