Et Keys (1-5) And Bt Button; Steering Adjustment; Wheel Cap Removal; Throttle Adjustment - Ko Propo EX-2 Instruction Manual

● ET Keys (1-5) and BT Button (1)
Functions may be assigned to the keys/button.
The possible functions which each key/button may be
assigned to are different.
● Steering Wheel Adjustment
Adjust the tension of the steering wheel spring.
[How to Adjust]
Insert a 1.5mm hex wrench referring to the image below.
Rotate clockwise to increase tension and counterclockwise to
decrease it.
Excessive counterclockwise rotation will result in the wheel being
unable to return to neutral position. In this case, rotate clockwise
until the wheel returns to neutral.
● Wheel Cap Remove
Insert Wheel Cap Remover to the wheel cap spoke.
Pull up Wheel cap remover with Wheel Cap.
● Throttle Trigger Adjustment
Adjust the position and angle of the brake trigger to your
preferences.
[How to Adjust]
Loosen the hex screws on the throttle trigger with a 1.5mm
hex wrench.
Freely adjust the brake trigger position.
Tighten the hex screws to secure.
Throttle Trigger
Brake Trigger
Hex Wrench
Hex Screws
Ball Joint
● Throttle Trigger Position Adjustment
The position of the throttle trigger may be adjusted to match the
user's hands.
[How to Adjust]
Loosen two screws on the rear side of the transmitter.
Slide the Throttle Trigger Position Adjuster as desired.
Tighten the loosened screws to secure.
● Colored Grip and Pad Replacement
Colored grip pad (optional) and Large/small grip pad
options are available.
《How to change》
Remove the two screws on each side of the grip to
detach the grip plates, then attach the colored grip
and pad.
Make sure the battery box or battery pack is removed
before replacing the colored grip and pad.
The tabs on the colored grip and pad are to be inserted
into holes. Note the direction.
Note direction of the colored grip and pad.
7
Screws
Throttle Trigger
Position Adjuster