Ko Propo Esprit-3 Universe Instruction Manual page 45

Stick Stick
Mode select
1WAY : The entire area has the same turning speed. You can set the TURN and RETURN speed.
2WAY : Setting the position of where the division takes place to set the speeds for each area.
The initial turn of the servo to operate slowly, then quicker after a certain position can be set.
When there is high traction and the car is twitchy, keep dropping the initial turn speed (Turn 1) and this will
help make the car corner better and become more stable.
TURN 1
TURN 2
For 2WAY
(setting of the TURN side)
An ideal setup isn't known until an actual run, due to settings varying
depending on factors such as servo, car, road surface, etc. Please test for
an optimum setting.
Due to the specification differences of servos, results of this function will differ.
ST SPEED (Steering Speed) - 1
Neutral
Neutral
The inclination of the graph changes
according to each numerical value.
Neutral
Max
Neutral
Neutral
RETURN 1
RETURN 2
Max
For 2WAY
(setting of the RETURN side)