Model Name - Ko Propo Esprit-3 Universe Instruction Manual

MODEL.NAME (Model Memory Name)
2
Assigning a name to the model memory number for easy identification.
Assigning a name in order to distinguish the model memories.
[How to open the setup screen]
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "MODEL.NAME" and press the 'ENTER'
key.
Use the Jog Dial, (+) or (-) keys to change the character to be used and press the 'ENTER' key to advance
to the next character to be used.
(After you have reached the end of the character line it, you will return to the first character.)
The maximum number of characters that can be inputted are 10.
Using the Jog Dial, (+) or (-) keys changes the character to be used and pressing the 'ENTER' key selects
the character.
The available characters that can be used for the model memory name are listed below.
When entering or editing the name, use the Jog Dial, (+) or (-) keys to select the character
and press the 'ENTER' key to advance to the next character.
The model name that is assigned to the model memory will appear from the initial screen
and in the model selection menu.
Press Back key to
finish MODEL.NAME.
The cursor advances
when "Enter" is pressed.
Select a charactor either
with Jog Dial or + , -keys
and press "Enter".