Set Up - Ko Propo Esprit-3 Universe Instruction Manual

SET UP (Set Up)

Assigning functions to the ET levers and BT buttons.
Assigning various functions to the ET levers and BT buttons.
The factory default setting has functions already assigned to the transmitter, but they can all be customized.
[How to open the setup screen]
Select Item
From the initial screen, use the Jog Dial, (+) or (-) keys to
enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the
menu list to "SET UP" and press the 'ENTER' key.
Use the Jog Dial, (+) or (-) keys to select the "ET" or "BT"
that you would like to modify press the 'ENTER' key.
Use the Jog Dial, (+) or (-) keys to select the function that you like to assign.
If the function is already being used, the function name will flash and the currently being used function
will be shown lower in the screen.
To cancel the current selection press the 'BACK' key and you will return to the "SET UP" screen.
To select the current selection press the 'ENTER' key and you will return to the "SET UP" screen.
Do Setup
If the functions are
already used, function
name will flash.
Selected item with
The Redundant
cursor to assign the
function name will be
function.
displayed in the lower
screen.
Function list according to ET/BT
It is a list of the function menu that can be allocated.
Indication contents of each function.
OFF None
ST TRIM Steering Trim
SUB TRIM Steering Sub Trim
TRAVEL Steering Travel
BRAKE Throttle Brake
THSP-LT Throttle Speed (Low Speed Turn)
THSP-MT Throttle Speed (Medium Speed Turn)
THSP-HT Throttle Speed (High Speed Turn)
THSP-LR Throttle Speed (Low Speed Return)
THSP-MR Throttle Speed (Medium Speed Return)
THSP-HR Throttle Speed (High Speed Return)
ABS.W ABS (Width)
ABS.P ABS (Position)
ABS.C ABS (Cycle)
TH TRIM Throttle Trim
TH SPEED Throttle Speed ON / OFF
ABS ABS ON / OFF
ACCEL Throttle Accelation ON / OFF
ACCEL.W Throttle Accelation (Width)
ACCEL.C Throttle Accelation (Cycle)
UPTIM Up timer
LAPTIM Lap timer
DOWNTIM Down timer
PRSET Preset the Throttle
CH3 3 Channels control