Lap Timer - Ko Propo Esprit-3 Universe Instruction Manual

Using the lap timer you can count your laps while running.
When using the lap timer while you are running, you decide on a recording point and by pressing either an assigned
[How to open the setup screen]
The initial setting is not assigned and the setup screen will be displayed.
START
"READY" blink
Alarm the Setup
Pre-Alarm Time
Display Lap Time
Next time start recorded
from displayed LAP
In this case start recording
from LAP 2.
While push "Enter" button then push together the
"+ and - "button,to clear all LAP records.
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "LAP TIMER" and press the
'ENTER' key.
If the lap timer is not assigned to an ET or BT the setup will be shown waiting for an assignment.
If the lap timer is stopped, settings can be changed in the settings screen.
(During a pause, setting adjustments are not possible.)
The lap timer will record up to a maximum of 80 laps.
If you exceed 80 laps, it will start recording over lap number 1 and continue.
The lap times that are recorded by the lap timer are recorded in the memory of the transmitter
regardless of changing the model memory number.
However, various settings of the lap timer are independent for each model memory number.
LAP TIMER (Lap Timer)
BT button or ET lever you will record the lap time.
If assign to BT2
While Count
Counter display Pause
ENT Do
Can not move the cursor
Pause and
restart in during pause.
LAP Records Stop
Start counting when push
the Assigned button.
Lap Timer Alarm
Lap Timer Pre-Alarm
Delete all Lap Records
Push "ENTER"button Cursor deletes the lap
to charge the cursor. of by the reset operation,
Push "ENTER"or"BACK" and cursor returns to
button to cancel. originals.
Together
When push the Reset key
during pause.all lap record
will clear.
need to set Alarm time.
A timer stops by controlling
a button after time progress.
1