Ko Propo Esprit-3 Universe Instruction Manual page 28

2 2
Custom Tone Editor
Back to select number
Changing data pointing cursor
Return to Select number
The upper part is an interval.
The lower part is length
of a sound.
Return to select number
Display the position
of sounds now.
Return to Select
number
Pitch of
Sound
Pitch Name
LCD Indication
Length of
Sound
Note
LCD Indication
The input
example
Main Menu (5)
Pitch and length interval of the sound are indicated below.
When the LCD display shows (point) this is a long silence.
LCD Indication
The length of each note is fixed, tempo becomes
Using the Jog Dial, (+) or (-) keys the cursor can
be moved to one of the six custom tones to be
customized. (Number Selection)
This example we will select custom tone 1 where there
is no data.
Using the Jog Dial, (+) or (-) keys, select the pitch of
the sound that will assign and press the 'ENTER' key.
(A~Z 26 musical scale. Please look below for the actual
sound.)
Using the Jog Dial, (+) or (-) keys, select the pitch of
the sound that will assign and press the 'ENTER' key.
(A~Z 26 musical scale. Please look below for the actual
sound.)
When the 'ENTER' key is pressed, the cursor will move
to the next sound and simultaneously the sound, which
is inputted, will be played back. Also, when the 'ENTER'
key is pressed the sounds that have been inputted will
be played back in its entirety. (When the cursor position
is not blank, the cursor will move to the next data
decision.)
To reset the input and clear the cursor press (+) and (–)
keys simultaneously.
=120