Steering Speed - Ko Propo Esprit-3 Universe Instruction Manual

ST SPEED (Steering Speed) - 1

The steering servo speed can be slowed down.
This function will restrict the maximum speed of the steering servo.
The speed of the servo turning from neutral and returning to neutral can be set.
From neutral to the endpoint on each side of the steering, you can divide the travel of the servo into two areas
to set the speed. (2 WAY)
[How to open the setup screen]
1WAY
In 1WAY,can not select POSITION.
2WAY
Displayed contents at "SPEED" and "POSITION" are change by setting value of MODE.
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "ST:SPEED".
Press the 'ENTER' key to access the setting screen.
Due to the specification differences of servos, results of this function will differ.
Choices are1way and 2way.
Use Steering to move to TURN2.
Can change the value , where cursor are pointing.
Use Steering to move to RETURN2.
TURN1 at bottom row , By steering can
change to TURN2.
RETURN1 at bottom row , By steering can
change to RETURN2.