Throttle Punch - Ko Propo Esprit-3 Universe Instruction Manual

Adjusting the throttle initial reaction to become quicker.
This allows for the throttle advancement side and the brake side to be adjusted.
[How to open the setup screen]
From the initial screen, use the Jog Dial, (+) or (-) keys to open the function menu and move the cursor to
"TH:PUNCH" and press the 'ENTER' key.
Using the Jog Dial, (+) or (-) keys select F (advancement side) or B (brake side) with the cursor and press
the 'ENTER' key. Using the Jog Dial, (+) or (-) keys you can adjust the value. To reset the value to 0%,
press and hold simultaneously the (+) and (-) keys.
Pressing the 'BACK' key or the 'ENTER' key returns you to the previous screen. Pressing the 'BACK' key
again will take you back to the function menu list.
Please note, the setting value of the throttle
punch is in proportional to the initial movement.
Using a combination of other settings can make the
throttle react like a switch between two points.
When using this combined with the ABS function,
please check the movement carefully before use.
This function is useful in canceling out the time lag of clutch engagement in a gas car.
In a gas car, the engagement of the brake can be strengthened with this setting.
For electric power cars using an ESC, the initial forward and brake punch is also effective.
TH PUNCH (Throttle Punch)
When push
"ENTER"
at each item.
the cursor
change to
Stick
TH
Neutral
Neutral Half Full Throttle

TH