Brake Mixing - Ko Propo Esprit-3 Universe Instruction Manual

This function will mix the brake action to Channel3.
You can use this function when it is necessary to adjust the front brakes, independently from the rear brakes like a 1/5
car. You should make your car rear brakes controlled by channel 2, front brakes controlled by channel 3.
It is possible to set it within
the range of 0~100%.
From the initial screen, use the Jog Dial, (+) or (-) keys to open the Function menu.
Use the Jog Dial, (+) or (-) keys to choose the "BRAKE MIX" function from the menu list and
press the 'ENTER' key.
Press the 'ENTER' key and the adjustment screen will appear.
In the "BRAKE MIX" function, you can adjust five parameters.
In the "BRAKE MIX" function menu, only the brake operation on the throttle servo
(brake direction input of CH2) and the servo for the front brakes (CH3) will be mixed.
Please refer to P.72 concerning other mixing.
BRAKE MIX (Brake Mixing) - 1