Throttle Curve - Ko Propo Esprit-3 Universe Instruction Manual

TH CURVE (Throttle Curve)

Throttle operation will have a curve (exponential) to the servo operation.
Throttle operation will have a curve (exponential) to the servo operation.
The throttle operation can be made quick or mild by applying a curve (expo) to the signal.
This can also be applied to the brakes.
[How to open the setup screen]
From the initial screen, use the Jog Dial, (+) or (-) keys to open the function menu list.
Use the Jog Dial, (+) or (-) keys to move the cursor to the function "TH"CURVE".
Press the 'ENTER' key to enter the setting screen.
Moving the cursor to F (advancement side) or B
(brake side) and press the 'ENTER' key and make
adjustments with the Jog Dial, (+) or (-) keys.
Setting value with a + curve is quicker, - curve is slower initially.
A + curve, is quicker initially but slower after.
A – curve, is slower initially, but quicker after.
Please confirm the set up movement when this is combined with other function settings.
Only the curve can be adjusted with this function. To increase the initial movement of the
throttle, please refer to throttle punch (P37).
To change the
value of each
item push "Enter"
at each to cursor
change to
Stick
TH
TH
Neutral
Neutral
Neutral Half Full Throttle
TH
TH
TH