Adjust Volume - Ko Propo Esprit-3 Universe Instruction Manual

ADJUST VR (Adjusting the Variable Resister)

Recalibrating the setting of the volume is updated.
Frequent usage of the steering and throttle and shipping can change the volume parameters from the normal deviation.
This function resets the normal deviation.
[How to open the setup screen]
Procedure of ADJUST VR
Steering operation
Discontinuance
Steering
Steering operation
The numerical value set by this explanation is one example. Values may differ in an actual operation.
It is possible to discontinue this operation by pressing the 'BACK' key before the 'ENTER' key is pressed after the throttle is operated.
(The setting value in this case is not written in the memory.)
Data abnormality with the steering operation, throttle operation or no operation are not accepted when the 'ENTER' key is pressed.
(The warning sound will be heard.)
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "ADJUST VR" and press the 'ENTER'
key.
Use the Jog Dial, (+) or (-) keys to move the cursor to "YES" or "NO".
Pressing the 'BACK' key while the cursor is on "YES" or "NO" will take you back to the menu list.
In addition, selecting "NO" will also return you to the menu list.
Selecting "YES" by pressing the 'ENTER' key will execute the adjust volume.
After the 'ENTER' key is pressed and while the function is executing, please do not touch the steering
or the throttle sticks.
If there are abnormal values in the resetting, the use of the transmitter may become inconvenient.
This function allows for the resetting of the volume parameters.
The frequency and period of this recalibrating will vary depending on the usage.
When performing this function and you are not able to finish or cancel it, please send it in to our service
repair department.
End
Operate all the way
to the left.
Discontinuance
Operate all the way
to the right.
Not executing this function correctly will cause problems in the transmitter operation.
We recommend contacting or sending this transmitter to our service repair department when
you are not familiar with this function.
ADJUST VR is
executed.
Throttle operation
Discontinuance
Throttle
Throttle operation
Operate all the way
to full throttle.
If "COMPLETE" is
displayed, press
'ENTER' or 'BACK' key.
Operate all the way
to full brake