Et Keys (1-5) And Bt Button; Steering Adjustment; Adjustment Of The Decrease Angle Adjuster; Throttle Adjustment - Ko Propo EX-RR Instruction Manual

● ET Keys (1-5) and BT Button (1)
Functions may be assigned to the keys/button. For key
allocation, please refer to KEYSET key configuration (p.29).
The possible functions which each key/button may be
assigned to are different.
● Steering Wheel Adjustment
Adjust the tension of the steering wheel spring.
《How to Adjust》
Insert a 1.5mm hex wrench referring to the image
below. Rotate clockwise to increase tension and
counterclockwise to decrease it.
Excessive counterclockwise rotation will result in the
wheel being unable to return to neutral position. In this
case, rotate clockwise until the wheel returns to neutral.
● Adjustment of the decrease angle adjuster
① The steering sponge is removed.
② Using a 2mm hexagonal wrench, insert into the
two holes of the steering wheel to adjust the
angle you prefer.
③ Perform the VR information configuration (p.38).
④ Replace the steering wheel sponge.
● Throttle Trigger Adjustment
Adjust the position and angle of the brake trigger to
your preferences.
《How to Adjust》
① Loosen the hex screws on the throttle trigger
with a 1.5mm hex wrench.
② Freely adjust the brake trigger position.
③ Tighten the hex screws to secure.
【Throttle Trigger】
Brake Trigger
The trigger may loosen over time due to temperature,
usage, strong impacts, etc., we recommend you glue
it in place. When there are times that it is still loosens,
please inquire to our service department.
Hex Wrench
Throttle Trigger
Hex Screws
Ball Joint
● Throttle Trigger Position Adjustment
The position of the throttle trigger may be adjusted
to match the user's hands.
《How to Adjust》
① Loosen two screws on the rear side of the
transmitter.
② Slide the Throttle Trigger Position Adjuster as
desired.
③ Tighten the loosened screws to secure.
● Adjustment of Trigger Tension
Strength (tension) of the spring for the throttle
trigger is adjustable.
《How to Adjust》
Using a 1.5mm hexagonal wrench (not included) insert
into the lower part of the grip section. When turned
clockwise (right) the tension becomes stronger,
counter-clockwise (left) it becomes less.
Hold the trigger lightly, insert the hexagonal wrench.
12
Screws
Throttle Trigger
Position Adjuster