Model Copy - Ko Propo Esprit-3 Universe Instruction Manual

Copying the data in a model memory to another model memory.
Contents of the current model memory are copied to another model memory number.
You can easily copy the settings of the same car to another model memory number for different course conditions.
[How to open the setup screen]
ex. To Copy Data of MODEL MEMORY1
to MODEL MEMORY2
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "MODEL.COPY" and
press the 'ENTER' key.
The current model memory will be copied. Using the Jog Dial, (+) or (-) keys to select which
model memory to copy the data to.
Using the Jog Dial, (+) or (-) keys, make your selection and press the 'ENTER' key.
Selecting "YES" and pressing the 'ENTER' key
Selecting "NO" and pressing the 'ENTER' key
Selecting "YES" and pressing the 'BACK' key
Selecting "NO" and pressing the 'BACK' key
Once executing the model copy, "COMPLETE" will be displayed and pressing either the 'ENTER' or
'BACK' keys will return you to the function menu list.
This is useful under the following circumstances.
Saving the current settings to try a new setup.
Moving the data in the Data Pack to the transmitter.
Moving data to the Data Pack for someone else to load into their transmitter and try.
Please note that you can copy the data to another transmitter, but the setup of the transmitter cannot
be copied.
Please note that copying the data to another model memory will overwrite any data stored in that
model memory number.
There is no way of retrieving the lost data, so please confirm your action before you execute
them.
MODEL.COPY (Model Memory Copy)
A copy place
is chosen.
"YES" is selected
and press the
'ENTER' key
The model is copied and "COMPLETE" is displayed.
Return back to the function menu list.
The cursor moves back to "NO".
Get a buzzer tone.
"No" is selected
and press enter
key , return to
menu list screen.
Press "ENTER Key"
or "Back key", return
to menu list screen.
When Model
copy is finished
a blinking
"COMPLETE"
will appear
in LCD
1