Option Menu - Ko Propo Esprit-3 Universe Instruction Manual

2 2
This is the menu displayed when the 'ENTER' key is pressed from the initial screen and scrolled down.
Power Alarm
This is the power alarm setting. If the transmitter is not operated within the listed time, the alarm will sound.
Alarm Setting
To change the setting use the Jog Dial, (+) or (-) keys.
The smallest initial value is OFF, minimum amount of time is 1 minute; maximum amount of time is 5 minutes. To
set the time, press 'ENTER' or 'BACK' keys to return to the main menu display.

Option Menu

Open the option menu.
In the option menu, you can adjust the LCD contrast and other features.
The display for the option menu changes as shown in the figures below.
After the
option menu
is opened,
using the
jog dial,
(+) or (-) keys
will move the
cursor.
Format
This is the menu to initialize the Data Pack. This menu appears when the Data Pack has been detected by the
[ . ] will be
increased
Main Menu (3)
The power alarm is an effective function to remind you that the transmitter
has been left on. The alarm will sound (when the transmitter has not been
operated for the set time) to remind you to turn off the transmitter.
Initial value
Three minutes are
set on this screen.
3 minute
system and is not displayed when not detected.
Data currently in the Data Pack is deleted when formatting
it. Data cannot be retrieved even if it is formatted by mistake.
Selecting "YES" confirms that you want to execute the format.
Flash "COMPLETE!!"
Please format a new Data Pack before using it.
Minimum amount Maximum amount
1 m / minutes 1 m / minutes
The LCD contrast can be changed.
(Please refer to P27 for further details.)
Buzzer setting.
There are additional sub menu items for this
function. (Please refer to P27 for further details.)
Backlight setting.
(Please refer to 29 for further details.)
To format, select YES/NO with the cursor and press the
'ENTER' key.
When "YES" is selected by pressing the 'ENTER' key, the
status of the Data Pack is displayed.
COMPLETE!! will be displayed and flashing when the
formatting is complete.
The display screen will return to the menu once any key is
pressed.
Interval
1 minutes