Throttle Preset - Ko Propo Esprit-3 Universe Instruction Manual

Moving the throttle servo to a set point using the ET lever or BT button.
This is used with either an ET lever or BT button. The throttle is moved to a position that is set while activated by either
the ET lever or BT button.
[How to open the setup screen]
ex. When display SETUP assign BT-1
From the initial screen, use the Jog Dial, (+) or (-) keys to enter the function menu.
Using the Jog Dial, (+) or (-) keys, move the cursor in the menu list to "TH:PRESET".
Press the 'ENTER' key to access the setting screen.
If "TH:PRESET" is not assigned to an ET lever or BT button, the SETUP will be displayed for
assignment.
The numerical value that can be assigned is 0~F150 or 0~B150.
The position of the throttle setting is not influenced by the value of other functions.
(If this is set to F100 and the "TH:HIPOINT" is set to 0 and the ET lever or BT button is selected, the
throttle moves to the position of F100 regardless.)
This is useful for the engine cut, idling up, full brake, reverse, etc.
The throttle will be fixed at the setting when the ET lever or BT button are
Caution!
accessed and the throttle movement will not be functional.
Prohibition
Please make sure to verify the setting before operational use. If the settings are
Caution!
incorrect, you may lose control of the car.
Prohibition
Refer to the SETUP (setup P58) when assigning the ET levers and BT buttons.
TH PRESET (Throttle Preset)
In initial screen there is
no assignd button , so
setup will display.
1