Indicator And Warnings - Ko Propo Esprit-3 Universe Instruction Manual

About the display of each indicator.
The three indicators (other than power indicator) will flash
regardless of a set value when is turned on with the ET lever
and a button.
Even if a function is not working effectively it will also flash
when ON.
About the Alar m Display
Battery Alarm
This is displayed when the power supply voltage
has dropped to 9V or less. The display of 'BATTERY
ALARM' will flash.
The power indicator will also flash. The alarm buzzer will
sound (sound modification is possible P27). Also the
backlight compulsorily is turned off.
'VOLTAGE' on the LCD will continue to flash even if you return to the initial screen.
After returning to the initial screen, the flashing voltage and flashing power indicator
will be cancelled after 1 minute.
Data Pack Error
This is displayed when there is something wrong with
the Data Pack while in use.
DATA PACK ERROR!! will flash.
After any key is operated, Model 0 is displayed.
Please view the model selection (P30) concerning the indication of model memory 0.
Memory Error
When a malfunction occurs while accessing the
memory, this will be displayed.
MEMORY ERROR will flash.
After any key is operated, model memory (memory 1)
and the factory default settings will appear.
If the power is turned on again and it is normal, the settings will be the original settings.
If this message does appear frequently, discontinue its use and send it to our service
department for repairs.
Power Alarm
The transmitter alarm will sound when there is no operation exceeding the set time.
The factory default setting is 3 minutes. The time can be set from the Main Menu: Power Alarm (P26).
The sound of the alarm can also be set from the Main Menu: Buzzer (P27)
Indicators and warnings
Throttle Acceleration Indicator
When throttle acceleration (P43) is activated, it will
flash. Also, if the function to turn
On/Off the feature is allocated to an ET lever and a
button, it will flash.
Power indicator
Throttle A.B.S. Indicator
When throttle A.B.S. (P34) is activated, it will flash.
Also, if the function to turn On/Off of the throttle
acceleration is allocated to an ET lever and a button,
it will flash.
Idle up indicator
When throttle Idle up lever is positioned up (meaning
activated), the indicator flashes.
Power indicator
When the power is turned on, it lights up. When it
flashes, the voltage has dropped below 9V.
(Battery Alarm)
1 1