Et Keys (1-5) And Bt Button; Steering Wheel Adjustment; Throttle Trigger Adjustment; Throttle Trigger Position Adjustment - Ko Propo EX-1 Instruction Manual

●ET Keys (1-5) and BT Button (1)
Functions may be assigned to the keys/button.
The possible functions which each key/button may be assigned to
are different.
●Steering Wheel Adjustment
Adjust the tension of the steering wheel spring.
[How to Adjust]
Insert a 1.5mm hex wrench referring to the image below.
Rotate clockwise to increase tension and counterclockwise to
decrease it.
Excessive counterclockwise rotation will result in the wheel being
unable to return to neutral position. In this case, rotate clockwise
until the wheel returns to neutral.
●Throttle Trigger Adjustment
Adjust the position and angle of the brake trigger to your
preferences.
[How to Adjust]
Loosen the hex screws on the throttle trigger with a 1.5mm
hex wrench.
Freely adjust the brake trigger position.
Tighten the hex screws to secure.
Throttle Trigger
Brake Trigger
The trigger may be loosened due to temperature, strong shocks,
or prolonged use. In this case, cementing the trigger in position is
recommended. If looseness persists, contact KO Propo Customer
Service Department.
Hex Wrench
Hex Screws
Ball Joint
●Throttle Trigger Position Adjustment
The position of the throttle trigger may be adjusted to match the
user's hands.
[How to Adjust]
Loosen two screws on the rear side of the transmitter.
Slide the Throttle Trigger Position Adjuster as desired.
Tighten the loosened screws to secure.
●ICS Port
This port is used for the ICS USB Adapter HS (sold separately),
which enables the transmitter to connect to a PC. Special
software, which can be downloaded from KO Propo's website,
enables the setting and modification of the transmitter's model
memory from a PC. It also enables numerous model memory
settings to be saved onto a PC. Refer to KO Propo's website
for details on how to use this feature.
( http://www.kopropo.co.jp/sys/ )
Connect to PC
●Headphone Jack
Attach audio plugs from commercially available headphones,
etc. (sold separately) to the transmitter. This feature helps
users hear the transmitter's operation sounds while in a noisy
pit area.
Audio Plug
(Sold Separately)
Even when headphones are plugged in, sounds will still be emitted
by the transmitter itself. The headphone jack is monaural.
7
Screws
Throttle Trigger
Position Adjuster