Timer Menu; Trgstart (Trigger Start); Lap History (Lap History); Alarm (Alarm) - Ko Propo EX-2 Instruction Manual

Hide thumbs Also See for EX-2:
Table of Contents

Advertisement

TIMER Menu

Operating Timer-related functions.
《Functions》
▶ TRGSTART Trigger Start
 
Prepares the stopwatch for activation via the throttle movement.
▶ LAP HISTORY 
 
Displays the lap times recorded by the stopwatch.
▶ ALARM 
 
Alarm will sound after the set amount of time has elapsed.
 ALARM STOP 
 
Sets an alarm buzzer to the continue sound mode
  (CONTINUE) or to the sound stop mode(STOP).
 P.ALM 
 
Sets a warning buzzer to sound at a set time prior to the alarm.
 NAVI 
 
Adjusts the lap navigation settings.
 START/STOP 
 
Assigns a key to activate/deactivate the stopwatch. (Required)
 LAP 
 
Assigns a lap key.
▶ TRGSTART Trigger Start
Move the cursor to [TRGSTART] and hold the ENTER key.
TRGSTART will switch to READY for a brief moment, then
push assigned [START/STOP]key or move throttle trigger.
TIMER タイマー
P
When the [START/STOP] key is set to OFF, it does not activate.
▶ LAP HISTORY 
Displays the lap times recorded by the stopwatch.
Scroll down when the R key is pushed, and scroll up
the L key is pushed.When pressing the BACK key, you
are returned to the Timer screen.
LAPHISTORY ラップキロク
001   00 02 20
002   00 05 51
003   00 05 09
004   00 04 72
005   00 02 70
TTL   00 20 25
P
100 lap times are memorized.
Only the last recorded lap times may be checked and
previously recorded results will not be saved.
(Even if the transmitter is switched off, the last
recorded times will remain in the memory.)
▶ ALARM 
Move the cursor to setting the various parameters.
 
【Setting Range】     
ALARM 
:1 MIN 〜 99 MIN(Default:5 MIN)
 Alarm will sound after the set amount of time has elapsed. 
 ※ Convenient for setting the anticipated race completion time.
ALARMSTOP 
:STOP / CONT(Default:STOP)
 Sets an alarm buzzer to the continue sound mode  
 (CONTINUE) or to the sound stop mode(STOP).
 ※ STOP Buzzer sound stop about 5 seconds.
※ CONT Until the START/STOP key is pressed the Buzzer
   sound will continue.
P.ALM 
:0 〜 30 SEC(Default:10 SEC)
 Sets a warning buzzer to sound at a set time prior to the alarm.
 ※ Convenient for setting a warning for when a race is about to end.
NAVI 
:0 SEC 00 〜 99 SEC 99(Default:0 SEC 00)
 Adjusts the lap navigation settings.
 ※ Convenient for setting a target lap.
START/STOP 
:OFF、ET1 〜 5、BT1(Default:OFF)
 Assigns a key to activate/deactivate the stopwatch. (Required)  
LAP 
:OFF、ET1 〜 5、BT1(Default:OFF)
 Assigns a lap key.
Configuration of the Timer function, settings aside
from switching [START/STOP] to OFF are required.
26
TIMER タイマー
MIN(minuite)  SEC(second)
 

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ex-ii

Table of Contents