Countdown Timer(Downtimer); Lap History(Laphistory) - Ko Propo EX-1 Instruction Manual

Hide thumbs Also See for EX-1:
Table of Contents

Advertisement

Countdown Timer(DownTimer)

A timer which counts down from a set time.
Example
Useful to tracking the refueling timing for a glow engine car.
Setting Range
MIN[minutes] SEC[seconds]
ALARM:1 MIN - 99 MIN 59 SEC(
The time from which the countdown timer will start.
P.ALM:0 - 59 SEC(
:0 SEC)
Default
Sets a warning buzzer to sound at a set time before
countdown timer ends.
START/STOP:OFF, ET1 - 5, BT1(
Assigns a key to activate/deactivate the countdown timer.
How to Use the Various Alarms
A warning buzzer may be set to sound prior to the alarm sounding.
If a [START/STOP] key is assigned, [TIM] will display on the initial
screen. If it is not assigned, [TIM] will not appear.
Assigning a [START/STOP] Key is Required!
A [START/STOP] key is required in order to use the countdown
timer function. Go to the initial screen and check if [TIM] is
displayed.
(m:minutes s:seconds)
:5 MIN)
Default
:OFF)
Default

Lap History(LapHistory)

Displays the lap times recorded by the stopwatch.
Use the jog dial to scroll.
Up to 6 lap times can be displayed at one time. Scrolling to the end
will display the total time.
Only the last recorded lap times may be checked and previously
recorded results will not be saved.
(Even if the transmitter is switched off, the last recorded times will
remain in the memory.)
47
(TTL:Total Time)
(Basic Operation p.15 )

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents