Timer; Timer Start; Trgstart; Lap History - Ko Propo EX-RR Instruction Manual

TIMER menu
Operating Timer-related functions.
《Functions》

▶ TIMER START

Start the timer.

▶ TRGSTART

Prepares the stopwatch for activation via the throttle movement.

▶ LAP HISTORY

Displays the lap times recorded by the stopwatch.

▶ START/STOP KEY

Assigns a key to activate/deactivate the stopwatch.

▶ LAP KEY

Assigns a lap key.
▶ >>>
The following page is displayed.
▶ LAP NAVI
Adjusts the lap navigation settings.
▶ ALARM TIME
Alarm will sound after the set amount of time has elapsed.
▶ P.ALARM
Sets a warning buzzer to sound at a set time prior to the alarm.
▶ ALARM MODE
Sets an alarm buzzer to the continue sound mode
(CONTINUE) or to the sound stop mode(STOP).
▶ TIMER MODE
The lap timer or down timer can be selected.
▶ <<<
The front page is displayed.
▶ TIMER START
When the cursor is highlighting the TIMER START,
ENTER key is pressed and held to start the timer.
TIMER タイマー
TIMER タイマー
While the timer is running and the BACK key is pressed, the
timer is halted. While the timer is halted, pressing the BACK
key again will return you to the TIMER screen.
▶ TRGSTART
Move the cursor to [TRGSTART] and hold the ENTER
key. TRGSTART will switch to READY for a brief
moment, then push assigned [START/STOP] key or
move throttle trigger.
TIMER タイマー
▶ LAP HISTORY
Displays the laptime records the stop watch.
Scrolldown when the R key is pushed, and scrollup
the L key is pushed. When pressing the BACK key,
you are returned to the Timerscreen.
LAPHISTORY ラップキロク
001 00 02 20
002 00 05 51
003 00 05 09
004 00 04 72
005 00 02 70
TTL 00 20 25
P
100 lap times are memorized.
Only the last recorded lap times may be checked and
previously recorded results will not be saved.
(Even if the transmitter is switched off, the last
recorded times will remain in the memory.)
▶ START/STOP KEY
The key which you start and stop the timer is assigned.
【Setting Range】 ：OFF、ET1 〜 5、BT1（Default：OFF）
▶ LAP KEY
The key which will score the lap time is assigned.
【Setting Range】 ：OFF、ET1 〜 5、BT1（Default：OFF）
▶＞＞＞
＞＞＞ When the ENTER key is is pressed after the
mark, the following page is displayed.
27