Timer Menu(Timer Menu); Stopwatch(Stopwatch) - Ko Propo EX-1 Instruction Manual

Timer Menu(Timer Menu)

Operating Timer-related functions.
[Functions]
Stopwatch
This may be used to keep track of elapsed time. It also has
a lap navigation function.
Countdown Timer
A timer which counts down the time.
Lap History
Displays the lap times recorded by the stopwatch.

Stopwatch(StopWatch)

Lap times may be recorded by setting a recording point, then
pressing a button when the car passes through that point.
It also features a lap navigation function.
After inputting the various settings, select [SW START] (hold the
ENTER key) to enable the stopwatch function.
(Basic Operation p.15)
Setting Range
MIN(minute) SEC(second)
SW START
Prepares the stopwatch for activation via the START key or
throttle movement.
ALARM:1 MIN - 99 MIN(
Default
Alarm will sound after the set amount of time has elapsed.
Convenient for setting the anticipated race completion time.
P.ALM:0 - 30 SEC( :0 SEC)
Default
Sets a warning buzzer to sound at a set time prior to the alarm.
Convenient for setting a warning for when a race is about to end.
NAVI:0 - 59.9 SEC( :0 SEC)
Default
Adjusts the lap navigation settings.
Conenient for setting a target lap.
START/STOP:OFF, ET1 - 5, BT1(
Assigns a key to activate/deactivate the stopwatch.
LAP:OFF, ET1-5, BT1(
Default
Assigns a lap key.
(s:second)
:5 MIN)
:OFF)
Default
(Required)
:OFF)
How to Use the Various Alarms
How to Start Stopwatch
Set the stopwatch settings.
Settings aside from switching [START/STOP] to OFF are required.
Move the cursor to [SW START] and press the ENTER key. SW
START will switch to READY for a brief moment before returning to
the initial screen.
Start the stopwatch via throttle operation or pressing the [START/
STOP] key.
Other settings may be adjusted during the time between the initial
screen is displayed and starting the stopwatch.
Timer starts when stopwatch is started.
Until the stopwatch is stopped it is not possible to switch to another
display screen. However, if ET or BT keys are assigned, they can still
be operated.
Assigning a [START/STOP] Key is Required!
A [START/STOP] key is required in order to use the stopwatch
function. If operation does not start when when SW START
is pressed, check whether the [START/STOP] key has been
assigned. Go to the initial screen and check if [TIM] is displayed.
How to Stop Stopwatch
Pressing the key assigned to [SW START] will stop the stopwatch. If
lap key is pressed while stopwatch is in use, the lap history record
may be viewed.
Up to 100 lap times may be stored. Laps will continue being
recorded consecutively until being reset.
The [NAVI] alarm will sound when the set time is exceeded. This is
convenient for knowing the target time while driving.
If the stopwatch is stopped by pressing the stop key, pressing it
again will restart the timer.
[Lap History] may be used to check the recorded laps.
If a [START/STOP] key is assigned, [TIM] will display on the initial
screen. If it is not assigned, [TIM] will not appear.
46
(m:minute s:second)