Model Copy (Mdl-Copy); Model Reset (Mdl-Reset) - Ko Propo EX-2 Instruction Manual

MODEL
▶ MODEL COPY
Copies the current model memory to a different model
memory.
【Example】
When changing settings on the same car to match
driving conditions, it is convenient to copy the original
memory before modifying it. This function also allows you
to try out new settings while keeping your original one.
Select the model memory to copy to, then hold the
ENTER key to copy.
MODEL モデル
MODEL SEL セレクト
MODEL NAME ネーム
COPY コピー MDL01 to
RESET リセット
Small window [COPY OK?] appears, then push the
ENTER key.
MODEL モデル
MODEL01
MODEL02
COPY OK?
【Setting Range】 MODEL:01 - 10Setting
When selecting the model memory to copy to, that model
P
memory's name will be displayed.
The settings which will be switched by Model Select are...
P
1)Steering Setting
2)Throttle Setting
3)3CH Setting
4)4CH Setting
5)Steering and Throttle Response
6)Steering and Throttle Feel
7)Setup Functions (ET1-ET5, BT1 function assignments)
8)Stopwatch Settings
The contents of the model memory that is being copied
to will be overwritten. Overwritten data cannot be
recovered, so be careful to avoid undesired memory
overwrites.
MDL01
ABCDEFGH
ABCDEFGH
MDL02
MDL01
ABCDEFGH
ABCDEFGH
MDL02
TO
25
▶ MODEL RESET
Return the current model memory to default factory
setting values.
Select [RESET] (hold ENTER key) to reset.
MODEL モデル
MODEL SEL セレクト
MODEL NAME ネーム
COPY コピー MDL01 to
RESET リセット
Small window [RESETOK?] displayed, then push the
ENTER key.
MODEL モデル
RESET OK?
Deleted data cannot be recovered. Be careful to avoid
undesired resets.
MDL01
ABCDEFGH
ABCDEFGH
MDL02
MDL01
ABCDEFGH
ABCDEFGH
MDL02
TO