Model Copy(Mdl-Copy); Model Reset(Mdl-Reset) - Ko Propo EX-1 Instruction Manual

Model Copy(MDL-Copy)

Copies the current model memory to a different model memory.
Example
When changing settings on the same car to match driving
conditions, it is convenient to copy the original memory before
modifying it. This function also allows you to try out new settings
while keeping your original one.
Select the model memory to copy to, then hold the ENTER key
to copy.
(Basic Operation p.15)
Setting Range MODEL:01 - 40
When selecting the model memory to copy to, that model
memory's name will be displayed.
The settings which will be switched by Model Select are...
1)Steering Setting
2)Throttle Setting
3)3CH Setting
4)4CH Setting
5)Steering and Throttle Response
6)Setup Functions (ET1-ET5, BT1 function assignments)
7)LED Color
8)Model Name
9)Stopwatch Settings
10)Countdown Timer Settings
The contents of the model memory that is being copied to will be
overwritten. Overwritten data cannot be recovered, so be careful
to avoid undesired memory overwrites.

Model Reset(MDL-Reset)

Return the current model memory to default setting values.
Select [YES] (hold ENTER key) to reset. Select [NO] to cancel
and return to the menu.
After reset is finished, [COMPLETE] will flash on the screen before
returning to the menu.
The settings which will be switched by Model Select are...
1)Steering Setting
2)Throttle Setting
3)3CH Setting
4)4CH Setting
5)Steering and Throttle Response
6)Setup Functions (ET1-ET5, BT1 function assignments)
7)LED Color
8)Model Name
9)Stopwatch Settings
10)Countdown Timer Settings
Deleted data cannot be recovered. Be careful to avoid undesired
resets.
19
(Basic Operation p.15)