Model Copy; Model Reset; All Reset - Ko Propo EX-RR Instruction Manual

MODEL menu

▶ MODEL COPY

Copies the current model memory to a different model
memory.
【Example】
When changing settings on the same car to match driving
conditions, it is convenient to copy the original memory
before modifying it. This function also allows you to try out
new settings while keeping your original one.
Select the model memory to copy to, then hold the
ENTER key to copy.
MODEL モデル
MODEL SEL セレクト
MODEL NAME ネーム
COPY コピー MDL01 to
RESET リセット
Small window [COPY OK?] appears, then push the
ENTER key.
MODEL01
MODEL02
COPY OK?
【Setting Range】 MDL 01 〜 40
When selecting the model memory to copy to, that model
P
memory's name will be displayed.
The settings which will be switched by Model Copy are...
P
1)Steering Setting
2)Throttle Setting
3)3CH Setting
4)4CH Setting
5)Steering and Throttle Response
6)Steering and Throttle Feel
7)Setup Functions (ET1-ET5, BT1 function assignments)
8)Stopwatch Settings
The contents of the model memory that is being copied to will
be overwritten. Overwritten data cannot be recovered, so be
careful to avoid undesired memory overwrites.

▶ MODEL RESET

Return the current model memory to default factory
setting values.
Select [RESET] (hold ENTER key) to reset.
MDL01
ABCDEFGH
ABCDEFGH
MDL02
MODEL
MDL01
ABCDEFGH
ABCDEFGH
MDL02
TO
Small window [RESETOK?] displayed, then push the
ENTER key.
Deleted data cannot be recovered. Be careful to avoid
undesired resets.

▶ ALL RESET

All model and system data is reset to the factory default.
Select "ALL RESET" and press and hold the ENTER
key to initialize the all reset.
MODEL モデル
RESET OK?
"ALL RESET OK?" is displayed and pressing the
ENTER key will execute the function.
If the BACK key is pressed, all reset is cancelled.
MODEL モデル
RESET OK?
When the initialization is run, the display shown below
is seen. Initialization requires about 20 seconds to be
performed, please do not turn off the power.
MODEL モデル
RESET OK?
When the initialization has ended, the system will
P
automatically restart. After the restart, the VR
information configuration must be performed.
Deleted data cannot be recovered. Be careful to avoid
undesired resets.
26
MDL01
ABCDEFGH
ABCDEFGH
MDL02
TO
MDL01
ABCDEFGH
ABCDEFGH
MDL02
TO
MDL01
ABCDEFGH
ABCDEFGH
MDL02
TO