Setting The Sound Level; Setting The Intensity Of Illumination Of The Buttons - Teletek electronics ECLIPSE 8 User's Operation Manual

Alarm control panels
Hide thumbs Also See for ECLIPSE 8:
Table of Contents

Advertisement

ECLIPSE 8/16/32/99 Series – User Operation Manual

5.22 Setting the Sound Level

In menu "5. KBD SETTINGS – 1. BUZZER LEVEL" or Address 90 you can set the volume
level of the keyboard buzzer. The setting is individual for every keyboard and there
are 4 different volume levels.
In order to change the volume level of the keyboard buzzer, the Manager needs to enter
his/her code first:
Manager code
The volume levels are shown on the keyboard displays as follows:
LED 32 – Zone numbers are lit
LED 8/16A – Lighting on digit buttons
1
1 2
1 2 3
1 2 3 4
The choice is confirmed by pushing the ENTER button.
Note: The sound level cannot be muted or disabled.

5.23 Setting the intensity of illumination of the buttons

In menu "5. KBD SETTINGS – 2. BRIGTHNESS" or Address 91, a setting for the intensity
of illumination of keyboard buttons is available. The setting is individual for every
keyboard and there are 7 different levels of intensity.
In order to change the intensity, the Manager needs to enter his/her code first:
Manager code
The levels of intensity are shown on the keyboard displays as follows:
LED 32 - Zone numbers are lit
LED 8/16A - Lighting on digit buttons
1
1 2
1 2 3
1 2 3 4
1 2 3 4 5
1 2 3 4 5 6
1 2 3 4 5 6 7
The choice is confirmed by entering the ENTER button.
Note: The intensity of button illumination set in this menu is seen only when the keyboard is used (a
button is pushed). If no button is pushed in an interval of 10 seconds, the keyboard goes into standby
mode, which has a default button illumination.
Address /
5. KBD SETTINGS – 1. BUZZER LEVEL
LCD – Number of symbols
>
> >
> > >
> > > >
Address /
5. KBD SETTINGS – 2. BRIGTHNESS
LCD - Number of symbols
>
> >
> > >
> > > >
> > > > >
> > > > > >
> > > > > > >
40
Reducing the volume
Increasing the volume
Volume level
Very low
Low
Medium
High
Reducing the intensity
Increasing the intensity
Intensity level
Very low
Low
Middle
Normal
Normal
High
Very high

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eclipse 16Eclipse 32Eclipse 99

Table of Contents