Adjustment Of Image Density - Toshiba e-STUDIO165 Service Manual

3.4.2

Adjustment of image density

The image density level can be set with the following codes.
Language
GDI PS/PCL
672-0 to 4 676-0 to 4
The image density level of the received FAX printing and List printing can be set with the following
codes.
Code
678-0 to 4 Received FAX Printing/List print-
ing Adjustment of image density
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn the power ON.
(2) Key in a code and press the [ENTER] button.
(3) Key in the sub code (0, 1, 2, 3 or 4), and press the [ENTER] button.
(4) Key in an adjustment value.
(To correct the keyed-in value, press the [CLEAR] button.)
e-STUDIO165/167/205/207/237
ADJUSTMENT
Item to be adjusted
Adjustment of image density
Item to be adjusted
3 - 26
06/11
< Adjustment Mode (05) >
When the value is decreased, text becomes
lighter.
Acceptable values: 0 to 63
Notes:
1. Set not to reverse the large and
small number of the setting value
corresponding to the sub code.
Ex.) When the image density
level for 672-0, 672-1, 672-2,
672-3, and 672-4 is assumed to
be "A", "B", "C", "D", and "E"
respectively, they should have the
following correlation:
A ≤ B ≤ C £ D £ E
2. Remember that the image speci-
fications and life span of the
replacing parts may not meet the
standard when the setting value
is changed from the default value.
< Adjustment Mode (05) >
Remarks
When the value is decreased, text becomes lighter.
Acceptable values: 0 to 63
Notes:
1. Set not to reverse the large and small num-
ber of the setting value corresponding to the
sub code.
Ex.) When the image density level for 678-0,
678-1, 678-2, 678-3, and 678-4 is assumed
to be "A", "B", "C", "D", and "E" respectively,
they should have the following correlation:
A ≤ B ≤ C £ D £ E
2. Remember that the image specifications
and life span of the replacing parts may not
meet the standard when the setting value is
changed from the default value.
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Remarks