Toshiba e-STUDIO165 Service Manual page 191

[B] Adjustment
(1) Close the ADF/RADF.
(2) Adjust it by turning the adjustment screws on the hinges.
• Adjust the height on the rear side by means of the screw on the hinge on the feed side of the
ADF/RADF.
Turn it clockwise ................. Heightened
Turn it counterclockwise ...... Lowered
• Adjust the gap on the rear side by means of the screw on the hinge on the feed side of the
ADF/RADF.
Turn it clockwise .................. Lowered
Turn it counterclockwise ...... Heightened
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 3-51
Fig. 3-52
3 - 53
e-STUDIO165/167/205/207/237
ADJUSTMENT
3