3) Moire/lack of sharpness
Moire
Defective area
Density reproduction
Parameter adjustment
value
Printer section
Lack of sharpness
Defective area
Density reproduction
Parameter adjustment
value
Printer section
e-STUDIO165/167/205/207/237
TROUBLESHOOTING
A
Fig. 5-3
Step
Check items
1
Check the reproduction of the image
density.
2
Check the image processing param-
eters.
3
Check test print image (13- [02.
PRINT TEST] -113).
Step
Check items
1
Check the reproduction of the image
density.
2
Check the image processing param-
eters.
3
Check test print image (13- [02.
PRINT TEST] -113).
4
Check the image processing param-
eters.
5 - 30
Prescription
Adjust the density.
Check the adjustment value for
sharpness.
When defects occur, perform the cor-
responding troubleshooting proce-
dure.
Prescription
Adjust the density.
Check the adjustment value for
sharpness.
When defects occur, perform the cor-
responding troubleshooting proce-
dure.
Check the encircled areas A and B in
the image, and change the sharp-
ness intensity in the sharpness
adjustment mode.
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
B