[G] 07. CLOCK IC TEST
After programming the fixed date and time on the clock IC, the test reads the programmed date and
time and checks whether or not they are correct.
<Key used in operation>
1
3
Power ON
07.CLOCK IC TEST
ENTER
Cancel
[H] 08. SCANNER TEST
The read/write test is performed on the RAM built in the image processing LSI.
<Key used in operation>
1
3
Power ON
08.SCANNER TEST
ENTER
Cancel
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Select test menu
Fig. 2-12
Select test menu
Fig. 2-13
2 - 93
06/09
<Display messages>
or
<Display messages>
or
e-STUDIO165/167/205/207/237
ERROR CODE AND SELF-DIAGNOSTIC MODE
2