Toshiba e-STUDIO165 Service Manual page 272

08-1328_0 (Pickup roller (PFP upper drawer) (Present number of output pages))
08-1328_1 (Pickup roller (PFP upper drawer) (Recommended number of output pages
for replacement))
08-1330_0 (Pickup roller (PFP lower drawer) (Present number of output pages))
08-1330_1 (Pickup roller (PFP lower drawer) (Recommended number of output pages
for replacement))
08-1336_0 (Recovery blade (Present number of output pages))
08-1336_1 (Recovery blade (Recommended number of output pages for replacement))
08-1336_3 (Recovery blade (Present driving counts))
08-1336_4 (Recovery blade (Recommended driving counts to be replaced))
08-1336_6 (Recovery blade (Present output pages for control))
08-1336_7 (Recovery blade (Present driving counts for control))
08-1372 (Heater and energizing time accumulating counter Display/0 clearing)
08-1378 (Counter for period of time fuser unit is at ready temperature)
08-1380 (Counter for period of time fuser unit is at printing temperature)
08-1382 (Counter for period of time fuser unit is at energy saving temperature/Counter reset)
08-1385 (Number of output pages (Thick paper 1))
08-1386 (Number of output pages (Thick paper 2))
08-1388 (Number of output pages (OHP film))
08-1410 (Counter for period of toner cartridge rotation time)
08-1411 (Counter for envelope)
Also, set the setting values which have been changed for servicing.
(17) Check that the setting value for 08-203 (Line adjustment mode) is "0" (For factory shipment). If it
is "1" (For line), change it to "0".
(18) Start the equipment in the normal mode and set the time and date.
e-STUDIO165/167/205/207/237
TROUBLESHOOTING
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
5 - 54
07/09