Toshiba e-STUDIO165 Service Manual page 287

[A] Update procedure
Important:
• The file system of USB storage device should be formatted in FAT format. Be careful since
the devices formatted in FAT32 or NTFS format will not be operated. The file system can be
confirmed on the properties in applications such as Explorer of Windows.
• Do not turn OFF the power during the update. The data could be damaged and not to be
operated properly.
(1) Connect the USB storage device to the PC and write the model specific folder and sub folder in
which the data file is stored.
• Confirm the model specific folder name, sub folder name and data file name before writing the
data
( P. 6-13 "6.3 Firmware Updating with USB Storage Device (When GA-1190/GA-1200 is
installed)").
• The file system of USB storage device should be formatted in FAT format.
• Windows 95 and NT do not support USB. Be careful since the data can not be written on the
devices in the PCs with these operating systems.
(2) Turn OFF the power of the equipment.
(3) GA-1190 only: Take off the cover plate.
When GA-1200 is installed: Take off the cover and disconnect the dongle from the USB connec-
tor (host).
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-23
Fig. 6-24
6 - 15
06/09
e-STUDIO165/167/205/207/237
FIRMWARE UPDATING
6