(9)
When updating has started, USB communication data are displayed in the STATUS field, and a
bar indicating the updating status appears at the bottom of the window.
(10) When the program data transmission is completed, the message window shown below appears
on your PC monitor. Click [OK] to finish displaying the status.
(11) Click [Exit] in the Firmware Download window to finish updating.
Note:
Note:
The display on the control panel of the equipment during the update is as shown below.
"Controller Data" is displayed; however, they are not downloaded.
•
Before update
Fig. 6-39
•
During the update
During the update, "Wait" is displayed after each item.
Fig. 6-40
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-37
Fig. 6-38
6 - 23
07/06
e-STUDIO165/167/205/207/237
FIRMWARE UPDATING
6